1 / 6
Pier for Star Adventurer Mount to AZ Goto mount. — image 1
1 / 6

Pier for Star Adventurer Mount to AZ Goto mount.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Basic pier to allow clearance for a Skywatcher Star Adventurer to be fitted to a Skywatcher Go-To Tripod.

Rating
0 / 5
Likes
2
Downloads
27
Makes
0
Views
182
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I really like my Skywatcher Star Adventurer tracking mount, but with funds and space being limited didn't want to drop yet more money on another tripod for astronomy/ photography. 

Testing showed my normal photography tripods were too flimsy for the Star Adventurer with the counterweight and light scope/ camera, I noticed the old Goto tripod from my Maksutov Cassigraine telescope, sorta, kinda, almost fitted it. I thought it just needed a basic pier/ riser to allow clearance for the Star Adventurer to be fitted to the Go-To Tripod.

It requires some 3/8 inch to ¼ inch adaptors a ¼ inch screw with hook/ lug for ease of handling and an old go-to base and it should go together fairly easily, with hindsight the hole I made for putting the screws in is a little fiddly, but it is do-able.

I rarely use the go-to head any more so this saves me having to buy a dedicated mount for the Star Adventurer. 

In terms of assembly, make sure you put on the printer bed ‘upside down’ so you don't need supports to get over the four embossed guides on the bottom of the model. 

I hope some of you get some use out of it.