1 / 1
AIrbrush Air Jet Cleaning Tool with standard 1/8 BSP Thread — image 1

AIrbrush Air Jet Cleaning Tool with standard 1/8 BSP Thread

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Very simple but effective air jet tool to connect to airbrush for cleaning, blowing out objects

Rating
5 / 5
Likes
13
Downloads
62
Makes
0
Views
360
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Very simple but effective air jet tool to connect to airbrush for cleaning, blowing out objects, like cleaning an RC Buggy after use ect …

Very simple model starting with a 1/8 BSP thread to connect to most airbrush compressors, the nozzle ends in a 1mm hole, if the hole is not nice at the very end due to print wobble you can cut it back with a sharp knife until you have de diameter you feel fine with.

To avoid wobble irregularities use a good raft as a print base that sticks the model very well and solid to the raft and be patient and print at slow speeds for best results.

Layer height 0.16mm, 100 percent infill, whatever material you want.

In the picture the print is already a bit damaged and dirty as I started to use it right away :)