1 / 5
Rear mirror for (e)scooter or bicycle, espejo retrovisor, Rückspiegel — image 1
1 / 5

Rear mirror for (e)scooter or bicycle, espejo retrovisor, Rückspiegel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Das ist ein Rückspiegel für meinen Escooter. Ausser den gedruckten Teilen braucht man noch eine M3-Mutter, eine…

Rating
4 / 5
Likes
17
Downloads
89
Makes
1
Views
808
Reviews
1

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution

Das ist ein Rückspiegel für meinen Escooter.
Ausser den gedruckten Teilen braucht man noch eine M3-Mutter, eine Zylinderkopfschraube DIN 912 M3x30 und einen "toter Winkel Spiegel" mit 5cm Durchmesser.
Die Mutter wird in die Kugel des Gelenks eingedrückt und die Schraube wird vom Spiegelhalter her in Richtung Kugel eingeschraubt.
Man sollte vor dem Verschrauben das Überwurfteil des Kugelgelenks, welches hier zu finden ist: https://www.thingiverse.com/thing:4739696/files -> Screw_v3.stl entsprechend positionieren.

Este es un espejo retrovisor para mi patineta.
Además de las piezas impresas necesitas una tuerca M3, un tornillo de culata DIN 912 M3x30 y un "espejo de ángulo muerto" de 5cm de diámetro.
La tuerca se presiona en la bola de la junta y el tornillo se enrosca desde el soporte del espejo hacia la bola.
Antes de atornillar, hay que colocar la parte de unión de la rótula, que se puede encontrar aquí: https://www.thingiverse.com/thing:4739696/files -> Screw_v3.stl.

This is a rear view mirror for my escooter.
Besides the printed parts you need a M3 nut, a cylinder head screw DIN 912 M3x30 and a "dead angle mirror" with 5cm diameter.
The nut is pressed into the ball of the joint and the screw is screwed in from the mirror holder towards the ball.
Before screwing, you should position the union part of the ball joint, which can be found here: https://www.thingiverse.com/thing:4739696/files -> Screw_v3.stl accordingly.

Print Settings

Printer:

AM8

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

80%

Filament: does not matter PETG whatever you like ;-)

Category: Sport & Outdoors

Tags