1 / 6
Wallmountable WaveShare P5 Matrix Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case I designed in order to mount multiple WaveShare P5 64x32 panels on the wall.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 91
- Makes
- 0
- Views
- 550
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a case I designed in order to mount multiple WaveShare P5 64x32 panels on the wall. The case is assembled using M3 Screws. You need the Pi and Non-Pi sides for one panel and then a pair of middle pieces for every additional panel. This was my first 3D modeling project so I apologize in advance for any errors. LOL
These are the panels I used:
https://www.amazon.com/dp/B0CLV5MHPX?ref=ppx_yo2ov_dt_b_fed_asin_title