Hueforge hex - Astronaut looking at a black hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge wall mounted hexagon
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Black Transmission Distance: 0.3
PLA Sunlu Purple Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Sunlu Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Purple
At layer #12 (1.04mm) swap to Red
At layer #18 (1.52mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.