1 / 1
Kasumi from Persona 5 Royal - Hueforge model — image 1

Kasumi from Persona 5 Royal - Hueforge model

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hueforge model. In the picture, I have the hex version (you can get it by cutting the model)

Rating
5 / 5
Likes
5
Downloads
34
Makes
1
Views
380
Reviews
1

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x112.5mm in size
 You may print at higher layer heights below the Min Depth of 0.48mm
 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
     PLA PolyLite Black Transmission Distance: 0.3
     PLA BambuLab Basic Red Transmission Distance: 4
     PLA Sunlu Purple Transmission Distance: 6
     PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
     Start with Black
     At layer #8 (0.72mm) swap to Red
     At layer #14 (1.2mm) swap to Purple
     At layer #22 (1.84mm) swap to Jade White for the rest.