1 / 4
WemosD1 mini box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple enclosure for WemosD1 mini and sensors breakout board. In my case i used a DS18B20 to create a…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a simple enclosure for WemosD1 mini and sensors breakout board. In my case i used a DS18B20 to create a wireless temperature sampling point.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
Yes
0.2
Infill:
10
Notes:
I used Ngen filament to have a more flexible part, but also PLA is good.
Support is not needed but recommended for better results.
Category: DIY