Halter für Messtabletten und Küvetten
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.05 net (excluding VAT)
For file: Photometer Halter - B 002 v3 v5.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.95 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Halter / Ständer für Mess-Tabletten, Küvetten und Stössel. Für ein Photometer zur Wasseranalyse in der Bädertechnik.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Halter / Ständer für Mess-Tabletten, Küvetten und Stössel.
Für ein Photometer zur Wasseranalyse in der Bädertechnik.
Die Stellfläche für die Küvetten und Deckel ist durch das Gitter
und auch im unteren Bereich von vorne und hinten belüftet.
Auch die Steckplätze für die Tabletten und die Rührstäbe haben Lüftungs.-/Ablauf- Löcher.
So kann sich keine Feuchtigkeit sammeln.
_____________________________________________________________________________
Holder/stand for measuring tablets, cuvettes and pestles.
For a photometer for water analysis in bath technology.
The area for the cuvettes and lids is ventilated by the grid
and also in the lower area from the front and back.
The slots for the tablets and the stirring rods also have ventilation/drainage holes.
This means that no moisture can collect.