Allsky Camera Housing for Raspberry Pi - SHT31 Outdoor Sensor Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little add-on to use the SHT31 outdoor sensor in @ChrisE's AllSky model.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Using the temperature sensor inside the box can give misleading results. That's why I used the SHT31 Outdoor Temperature & Humidity Sensor. https://www.dfrobot.com/product-2160.html
I created a small add-on to use the sensor outside the box.
For the cable hole, drill a hole with a 9mm drill bit or soldering iron. Glue the part well. Use a gasket if possible.
Inner Diameter: 5mm
Outer Diameter: 9mm
Length: 18mm
Glue the sensor holder to the outside of the box. Attach the sensor before sticking it to the box. The sensor fits tightly, it needs a little force. Do not glue the sensor, it will be difficult to replace it in case of failure.