Specna Hopup Arm - Original and Flat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fairly exact copy of the hop-up arm used in the original Specna Arms Edge SA-E17, but most likely the same one is…
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 119
- Makes
- 0
- Views
- 1,047
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fairly exact copy of the hop-up arm used in the original Specna Arms Edge SA-E17, but most likely the same one is used in any Specna replica with a rotary hopup chamber.
There are two versions: the copy of the original part, and a sewed-off version for R-hop and similar.
Use a 2.0 drill bit to clear the hole and optionally some sand-paper to give a final touch.
Print in ABS. Donot use PET or PET-G because it bends, and also avoid PLA since it will melt on the first hot day.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
0.20
Infill:
90% Gyroid
Notes:
- ABS
- Extrusion Width: 0.42 mm
Category: Sport & Outdoors