R2-D2 Holoprojector (3-part)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fairly accurate model of R2-D2 holo projector with a separate lens and the eye socket. This is a full model for…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 275
- Makes
- 0
- Views
- 1,449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fairly accurate model of R2-D2 holo projector with a separate lens and the eye socket.
This is a full model for building into a dome, but if you need one just for surface mounting (dummy projector), you can use the included surface-mount models. The surface-mounting versiondoes not have a hole all way through, so you might want to make one in the model before printing it.
Lens
You can use the "lens polishing rod" to hold the lens in a drill chuck, so you could polish it easily using some sand paper (take the rod out when you're done). You can also use acetone polishing, if printing in ABS.
Print Settings
Supports:
No
Category: Toys & Games