JAPANESE-MOUNTAIN-HUEFORGE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is another piece off of displace.com. Just a lovely Japanese art piece.
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 219
- Makes
- 3
- Views
- 1,075
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: JAPANESE-MOUNTAIN.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 168.57x236mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Natural Transmission Distance: 21
PLA Overture Red Transmission Distance: 4.8
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Natural
At layer #13 (1.12mm) swap to Red
At layer #17 (1.44mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.
I HAVE IT PRETTY CLOSE TO THE ORIGINAL PIC, BUT AM FIGHTING WITH THE RED GOING PLACES I DON'T WANT IT.
PLEASE LET ME KNOW HOW YOU LIKE IT AND ANY FEED BASK IS ALWAYS WELCOME.
YOU CAN FIND THE PIECE FOR SALE ON DISPLATE.COM