1 / 4
Wandhalter für MAKITA Kettensäge DUC353 — image 1
1 / 4

Wandhalter für MAKITA Kettensäge DUC353

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wandhalter (Wallmount) für MAKITA Kettensäge (chain saw) DUC353

Rating
5 / 5
Likes
17
Downloads
186
Makes
1
Views
886
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Ein stabiler Halter für die MAKITA Kettensäge DUC353. Ich empfehle die Akkus getrennt zu lagern, da gibt es gute Halter zum Download.

Benötigte Schrauben: 4 - 4.5 mm, Senkkopf, Länge nach Bedarf

Material: PLA

Auflösung: 0.22 mm

Kein Support nötig bei Druck auf der Seite des Haltepins. Falls ohne drehen gedruckt wird, dann ist Support nötig aber der Halter sollte noch stabiler werden.

Infill: Cubic, ≥35%

4 Walls, 4 Oberflächen

------------------------------------------------------------------------------------------

A stable holder for the MAKITA chainsaw DUC353. I recommend storing the batteries separately, there are good holders available for download.

Screws required: max. 4.5 mm, countersunk head, length as required

Material: PLA

Resolution: 0.22 mm

No support is needed when printing on the side of the holding pin. If you print without turning, then support is needed but the holder should be even more stable.

Infill: Cubic, ≥35%

4 walls, 4 surfaces

Tags