tetris balance game incl. second base "level hard"

My version of the tetris balance game.

It's a "light version", without inner walls, the bricks have only outer perimeter.

There are two versions of the dice with 8 sides: one with symbols of the bricks (Q4, I4, I3, T4 etc.) and one with holes for adding small pins printed in the same colour like the bricks.

I made 8 different bricks and printed them in different colours:

I2, I3, I4, T4, Q4, Z4, L3, L4.

The bases are 20mm wide, same as the shortest side of each brick.

One base is easy mode and the second is expert mode ;-)

I also added a “Joker” brick, c5 (cross5) - printed in multicolor, so you can use it, whenn all bricks of one colours are already gone, or you can create your own rule fot it.

You can downscale the base and the bricks to 50% so you get a smaller set for travelling, with 10mm of the shortest side.

All parts printed with PLA/PLA+.

If the printed pins don't exactly fit into the dice's holes, you can help a little bit with glue or sand paper.