1 / 5
|Pokemon| Kalos Pokedex inspired Card Holder — image 1
1 / 5

|Pokemon| Kalos Pokedex inspired Card Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

a simple card holder inspired by Kalos Pokedex made using 3D printing and laser cutting

Rating
0 / 5
Likes
27
Downloads
51
Makes
0
Views
1,072
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike
| BASIC DESCRIPTION |
  • this is a basic card holder inspired by Kalos Pokedex
  • the card “floats” in the frame - made by 2 pieces of acrylic and a thin sheet of plastic that holds the position of the card in relation to the frame
  • it is primarily made to be used on multi color printers (like MMU from prusa, some toolchangers… in tandem with a laser cutter/engraver) but you can also print it in sigle color and paint it yourself or leave it as is (you can see in the pictures that I have tried to print it in a woodfill variant)
  • the uploaded version has a dxf file uploaded for laser cutting - version for ultra pro penny sleeves
  • the dxf file doesn't contain the engraving that yo can see in my pictures (grass and psychic types)

 

| DESIGN DECISIONS |

  • it had to be modeled so that it didn't need any supports
  • the card should look like it is suspended in the air like in the the representations of the pokemon in this type of pokedex
  • the position of the card should be fixed in a way that it does not interfere with the transparency of the design and it should be flexible (accomodating various dimensions of sleeves
  • the acrylic sheets are each 2 mm thick

 

| PRINT SETTINGS |

  • there are no need for supports
  • General settings:
    • 0,15 - 0,25 mm layer height
    • 5-10% infill (also works with no infill)
    • 2 perimeters

 

| ASSEMBLY |

  • you will need to 
    1. print 2 identical parts for top and bottom of the frame
    2. laser cut (or by some other method - CNC, hand tools) 2 basic rectangles (dxf in the files) without the center hole - acrylic or some other tipe of plastic that is 2 mm thick
    3. laser cut (or cut by hand) 1 rectangle with the center hole in the dimension of the sleeve that your card is in - I recommend you use a sheet of transparent plastic that is as close to the thickness of the sleeved card as possible
  • first - place the thin sheet of plastic onto the acrylic plate and center the sleeved card on it
  • place the second sheet of acrylic on top of that and make sure that the edges of all three sheets are aligned properly
  • carefully slide the acrylic into the top and bottom 3D printed part
  • and that is it! enjoy!

Tags