1 / 2
Magic Harry Potter hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Harry Poter hueforge 175x175
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 151
- Makes
- 3
- Views
- 1,032
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 175x173.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #14 (1.2mm) swap to Orange
At layer #21 (1.76mm) swap to Yellow.