Customizable Star Wars 501st Imperial Officer Rank Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Openscad program based upon the specifications provided by the 501st legion on their Imperial Rank Bar page.
- Rating
- 4 / 5
- Likes
- 69
- Downloads
- 180
- Makes
- 2
- Views
- 962
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Overview
The 501st Legion - Vader's Fist is a fan-run costuming organization that requires costumes to be screen-accurate. Their costuming database contains specifications of how the Imperial Officer Rank Bar should appear.
Rank bar requirements: https://databank.501st.com/databank/Costuming:Imperialrankbar - Note that a single rank bar with two rows of rank tiles are explicitly forbidden. You need to print two separate rank bars and attach them to your costume if you are creating a rank that requires two rows of rank tiles.
Approved ranks: https://databank.501st.com/mw501/images/b/b8/IOC_Approved_Rank_Charts_-_Google_Sheets_page-0001.jpg
Understanding ranks: This is the best source I could easily find for an explanation of imperial ranks: https://www.reddit.com/r/MawInstallation/comments/67ly1d/imperial_rank_insigna/ and in particular, this image: https://imgur.com/tJZRj3b
This OpenSCAD program allows for the model to be customized:
- Style - Original Trilogy/Mandalorian vs. Rogue One/Solo/Andor rank bars.
- Number of rank tiles - How many tiles on the rank bar, between 1 and 6.
- Attachment Style - How the rank bar will be attached to the costume. Currently the choices are:
- Magnets - Pockets are created in the back rank bar where magnets can be glued, and then matching magnets can be affixed to the costume in some manner to hold the bar in place.
- Stitching - Holes in the corners of the rank bar so that it can be sewed to the costume.
- Velcro - A channel is created in the back of the rank bar where a part of a hook&loop fastener can be glued while the other is sewed to the costume.
- None - Something else will be used to attach the rank bar to the costume, you'll figure it out.
Each attachment style has additional parameters to customize such as the size of the magnet or the size of the stitching hole.
While this model was created using the specifications of the 501st Legion costuming page, no one to my knowledge has printed this rank bar and subsequently it approved by the 501st Legion. Post-processing would certainly be required as no visible layer lines is a 501st requirement, and typically the top of the rank bar has enough top layer artifacts that it would need some level of processing.
Recommendations
Paint the rank bar itself with a metallic spray paint using one to two coats to get rid of the top layer artifacts.
Print the rank tiles using the appropriate color translucent filament/resin and use something like Smooth-On XTC-3D to “paint” the sides of the tile to remove the layer lines. The rank tiles themselves are printed face down, use a smooth print bed rather than a print bed with a texture or with some patterning.
Notes
There are 2 styles, 6 lengths, and 4 attachment types. Ignoring the other customization possibilities, that's 48 combinations of rank tiles, and I can't include all of the STLs that can be made. Download the imperial_rank_bar.scad file and OpenSCAD ( https://openscad.org/downloads.html ) and customize the rank tile bar to your specifications. This model was developed using OpenSCAD version 2021.01.
After using the Customizer section of OpenSCAD to create your model, use the PART drop down to select either Rank Bar or Rank Tile, then Design → Render, and finally File → Export → Export as STL. Save the STL and then slice for printing. If the rank tile indent is changed, you'll need to print a new Rank Tile because that option makes the rank tiles thicker so they stick up above the Rank Bar the required distance. Otherwise, you should be able to use the standard rank tile attached.
File Descriptions
imperial_rank_bar.scad - The OpenSCAD file that creates the customized rank bar / rank tile
ot_[N]_[S]_[A]_rank_bar.stl - Various examples of customize rank bars.
- ot = Original Trilogy/Mandalorian rank bar style
- N = the number of rank tiles that fit on the rank bar
- S = the size of the attachment style, skipped for None of course
- A = the attachment style, none vs stitched vs magnets
ot_rank_tile.stl - The rank tile to be mounted in the bar.
Change Log
28 Oct 2024: Update List:
- Modified "Complete Assembly" to be printable rather than a rough preview
- Fixed bug related to tile_tolerance/rank_tile_indent noticed by grilparto
- Always make the stitching hole in the center of the rank bar border
25 Oct 2024: Original model published