LowRider v4 CNC - Buck Converter Tray for Ryan's V1E LR4 Jackpot Enclosure - can be attached w either zip ties or screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LowRider v4 CNC - Buck Converter Tray for Ryan's V1E LR4 Jackpot Enclosure - can be attached w either zip ties or screws
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 65
- Makes
- 0
- Views
- 740
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
LowRider v4 CNC - Buck Converter Tray for Ryan's (V1E) Jackpot CNC Control Box for the LowRider 4 CNC.
A buck converter can be used to provide 12v to a 12v fan, even if your power supply is 24v. It can also be used to under-volt LED lights to run them cooler and make them last longer.
This tray can be attached with either zip ties or screws. If mounting with screws, use two M3 x 12 mm. No nuts needed. I drilled two holes in the left side of Ryan's Jackpot enclosure using a 7/64" drill bit. I pre-marked the hole locations with a Sharpie, at about 14mm down from the top edge, and using the spacing of the top corners of the printed tray, since those corners are the same distance apart as the holes themselves. Below I illustrate these corners, but I marked and drilled from the outside of course.

My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 4 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.

















