1 / 8
Light Mount for Tubus brand Tara front-pannier rack — image 1
1 / 8

Light Mount for Tubus brand Tara front-pannier rack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Creates a 31.8mm dia space for mounting lights to Tubus Tara front-pannier rack.

Rating
0 / 5
Likes
4
Downloads
54
Makes
0
Views
613
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

My touring/commuter bike has run out of handlebar space, with a bell, Garmin mount, and cross-levers already installed. To mount I light, I had to forfeit a place for my hands and just wrap the light around the padded bar-tape. But I kept thinking - there must be a way to mount a light to my Tubus Tara front-pannier.

This part creates the space, and is super lightweight - only adding 20g to the bike. Several iterations of design resulted in the shape, which ultimately is simply a 1-inch wide cylinder that's the same diameter as modern 31.8mm handlebars. The dimensions mean that you can mount many other things than a light in this position: anything that needs 25.4mm of width can be mounted to it. The Tubus rack is bomb-proof, so can easily handle it.

So far it's passed the distance test, going on a bike-touring trip from Prague to Berlin in two days without any need for adjustment.

I recommend printing in "draft" mode to get thicker layers and faster printing. 2 walls with 20% infill is sufficient. Definitely use a brim (the .gcode and .3mf already have brims configured), as the part would not be stable to print otherwise.

Choice of material is somewhat important, but I don't think overly critical. PLA is fine, but ASA is UV-resistant. You're likely biking outside more than inside!

The part also needs a single screw to clamp the two parts to the Tubus Tara. I used a “sheetmetal” screw from my junk box that was 3mm dia on the threads, and about 17mm long overall, with a 7mm dia head. Sheet metal screws bite nicely into the plastic to cut their own threads. If you are mounting something that claps tightly around a 31.8mm handlebar, you might not need to use a screw, as it'll also hold the two parts together.

The clamp is designed so the two parts are pulled together with the screw and the angled cut between them clamps onto the rack's tubing, even though it's offset. It's like a cantilever-clamp, if you imagine it.

 

Tags