8 prong Espresso WDT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of aclmech's excellent WDT design to use the installation mechanism from vonbauernfeind's also excellent WDT.…
- Rating
- 4.8 / 5
- Likes
- 44
- Downloads
- 241
- Makes
- 5
- Views
- 2,288
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A remix of aclmech's excellent WDT design to use the installation mechanism from vonbauernfeind's also excellent WDT. This one is designed to fit a specific 0.4mm x 75mm 3d printer needles that have a handle on the blunt side. I used https://www.aliexpress.com/item/4000704179904.html or https://www.aliexpress.com/item/1005001688627876.html. This design uses the handles to keep the needles from falling through the holes. To keep the needles from being pushed up into the handle, you can shim the handle with some cardboard or paper to keep some downward pressure on them.
The tolerances are very tight on my printer, so scaling it up slightly might help if you're having trouble fitting the needles in. If you're a fusion 360 user, you can adjust the diameters of the first (main handle diameter) and second (handle tip diameter) to match your printer.
Edit: added a 6 prong design. It's a little smaller for smaller baskets
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.005mm quality
Infill:
15
Filament:
Hatchbox PLA Black
Category: Kitchen & Dining