1 / 2
Magnetic loop antenna 3.8 to 1 gear reduction drive. — image 1
1 / 2

Magnetic loop antenna 3.8 to 1 gear reduction drive.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This makes tuning a magnetic loop antenna much easier.

Rating
0 / 5
Likes
11
Downloads
76
Makes
0
Views
546
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This is a 3.8 to 1 reduction drive for making magnetic loops easier to tune. It's best to print the clutch and input gear at 40% infill and 3 perimeters for strength. The output is set for capacitor shafts of 6.4 mm diameter. If you have a different shaft diameter, let me know and I'll produce additional models to accomodate.
There is a assembly instructional video linked here. Please watch it before attempting assembly. You will need 6 M4x20 and 1 M4x8 button head screws. Also a M3x8 with a nut.
https://youtu.be/AjSzK6fjMsU