A-10 Warthog HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My favorite U.S. warplane, the A-10 Warthog. #37221
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 33
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: Warthog v3.hfp
Height Modifier added for Black: 0.0-1.12 @ 0.16 Layer Height
Instructions without height modifier:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 165x220mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3.2mm and the Actual Depth is 2.6mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 5
PLA Kingroon Skin Transmission Distance: 3.7
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #20 (1.68mm) swap to Blue Gray
At layer #25 (2.08mm) swap to Skin
At layer #28 (2.32mm) swap to Jade White for the rest.