1 / 5
Mayan/Aztec Death Whistle Quick Print Halloween Special
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified print profiles for exceptional quality with PLA or PETG using a 0.8mm nozzle (Bambulabs A1 Mini & P1S)
- Rating
- 5 / 5
- Likes
- 138
- Downloads
- 1,166
- Makes
- 2
- Views
- 5,523
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
- Optimised for exceptional quality with PLA or PETG using a 0.8mm nozzle (also works with 0.4mm nozzle from 0.20mm to 0.28mm layer height)
- Model scaled to 75% size for a higher pitch (scarier)
- Great adhesion when printing a full bed of parts
- Very easy removal of the tree supports just using your finger
- With dry filament my prints came out very clean and ready to use
Clean up the top hole if there's any stringing and hold it sideways when blowing on it.
Here's how it should sound like
Have fun!
Credit to https://www.thingiverse.com/thing:2662731 for the original STL