Fingerboard 32x100mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cool little fingerboard that you can play with!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 40
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
INFO:
This board is compatible with regular Teck Deck trucks, and should work with many other trucks.
This is a flat blank that uses a mold that will shape it into it's correct shape.
Mold Used:
https://www.thingiverse.com/thing:4426394
Use the 98x32x50x25x3_Shaper_Plate.stl
I recommend Using a vice for this
The Press doesn't need to be 100% infill, only the board/deck does
DIRECTIONS:
Once the Deck is finished, unstick it from the bed, but leave it still on the bed, and heat up the Deck to around 75C for Pla, in order to soften it. (I recommend using your printer's heated bed for this)
Once you let it sit on the bed at around 75c for a couple of minutes, put the deck in the mold and clamp it down. (You dont need to clamp it tightly, the heat will mold it)
Wait a few minutes for it too completely cool down, and there you go, you've got a finished deck.
For Abs, heat heat up your bed to the temperature that your material starts to become more plastic/bendable.