1 / 2
Joker and Batman hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello!! I bring you a hueforge made with only three colors, it is a unique model of these super heroes well known to eve
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 60
- Makes
- 1
- Views
- 346
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.26mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Matte Ash Gray
PLA smartfill blanco frio
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Ash Gray
At layer #15 (1.28mm) swap to blanco frio for the rest.