Ender 3 S1+ Plus Purge bucket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Purge bucket for S1 Plus. No axis disassembly is required.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 77
- Makes
- 1
- Views
- 896
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
My remix to Aleksei Korolkov's design (thanks for including Fusion file!)
No axis disassembly is required!
Added an insert to use a 15mm long PTFE tube as the nozzle wiper, because I didn't have any heatproof plastic piece and the foil alternative was not working great for me, so I needed to improvise with what I had in hand :)
As you can see, there's probably room for improvement, but it's working well so far.
I am not an expert, and I would appreciate any feedback.
Fusion 360 file included in case you want to remix it.
You will need:
15mm long PTFE tube
2x M2.5 Bolt (more or less 5mm long) for holding the PTFE
2x M3 bolt (8-12mm)
2x M3 nuts
Klipper macro: I call it in the last line of my START_PRINT macro:
[gcode_macro START_PRINT]
gcode:
; (Existing START_PRINT code...)
G1 E10 F400 ; EXTRUDE 10mm
G1 E-1 F2400 ;Retract 1mm
CLEAN_NOZZLE[gcode_macro CLEAN_NOZZLE]
gcode:
G1 X316 F5000
G1 X300
G1 X316
G1 X300
G1 X316
;note: to allow you extruder to go to 316 you need to change printer.cfg to allow it:
[stepper_x]
position_max: 316