osVAC Adapter for Bosch Devices (various angles available!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters of various angles to connect Bosch devices with Bosch-specific Click and Clean connector to the osVAC system
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 43
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update - various angles now available!
Description
This is an adapter to connect any Bosch device with the Bosch-specific Click and Clean vacuum socket to the osVAC system. I made it for the Bosch miter saw GCM 8 SJL, but it should also fit other Bosch devices, if they have the Click and Clean vacuum port.
The outer diameters are 45 mm on the device side and the osVAC side is the M32 (that is, 32 mm diameter).
I have added various angles of the adapter, so that you can choose the one that fits best your needs or workshop. Also I have slightly reworked the transition between the two ends.
Printing
The adapter has a quite snug fit on the device to make it somewhat air-tight . If you do not expect any shrinkage or if you fear it is not going to fit, you can perhaps scale it to 99% and a bit.
The original version of the adapter features a 45° angle so that you can print it without any supports. Alignment for the print is with the Bosch side facing the print bed. The print is in PETG, but PLA probably also does a good job.
For printing the variants with larger angles, you probably need supports or perhaps reorient the model.
Model
You can find the original and configurable model in OnShape here: https://cad.onshape.com/documents/3fe479b69d4fa098f4b9083d/w/81b4c3a2ceefd480778ddd8c/e/2142b2d27da2f4cbc6dfa5eb
If you don't have the osVAC system, you can perhaps use the adapter to Makita vacuum cleaners that I also made and is available here:
https://www.printables.com/model/252101-adapter-bosch-devices-to-makita-vacuum-cleaner
Feedback
Feedback? Ideas for improvements? Please leave a comment or drop me a message.