BM-800 Axial Mount for TSC-1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two part mount to hold a TSC-1 or any 34mm diameter capsule onto a BM800 style mic body
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This model is currently untested. I'll update if there are any changes ones the parts arrive and I assemble the mic.
This is a mount for an axially oriented 34mm condenser capsule compatible with the cheap BM800 and BM700 mic bodies available online. For instructions on use I recommend looking at SoundSleuth's (https://www.thingiverse.com/soundsleuth/designs) Instructables page.
https://www.instructables.com/OPA-Based-Alice-Microphones-a-Cardioid-and-a-Figur/
The base was reverse engineered from ViewUpHere's model located here: https://www.thingiverse.com/thing:2541735
with the design inspiration from SoundSleuth's model here: https://www.thingiverse.com/thing:2541735
I recommend printing in the provided orientation. This is not the strongest orientation for the posts, but the adhesive and low loads placed on the part shouldn't allow that to become an issue.
The tolerance between the pin and socket to attach the parts is intentionally generous to allow for a healthy amount of adhesive material.
The capsule and mounting ring are too large to fit through most BM800 model mic guards in this orientation. I recommend removing the wire mesh from the frame, mounting the capsule, and then reattaching the mesh.
- Edit: It looks like this will fit sideways through the hole in the bottom of the cage. Be careful as it will be very easy to damage the capsule doing this
(I also uploaded this model to Thingiverse here: https://www.thingiverse.com/thing:6812409 )