1 / 1
Rotating Filament Swatch Display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rotating filament swatch to collect your filament and collect them all !
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 551
- Makes
- 5
- Views
- 2,219
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reupload from Makerworld, made by TimothySt:
Adaptation of BradFTBT3D's great design.
I was annoyed that the display only turned in one direction, meaning once you miss the desired swatch you have to circle all the way around to it again. So I modified the bottom part and now it moves in both directions.
Original print instructions:
Print Settings:
- Top Layer Height: 0.20mm
- Bottom Layer Height: adaptive or 0.10mm (for smooth ramp)
- Top & Bottom Surface: Concentric
- Print top upside down
- Use Arachne wall generator for best results
- As designed it will only turn clockwise, mirror base to turn counterclockwise
For best turning:
- Sand the ramp smooth with 220 grit sandpaper if needed (and lubricate a bit)
- Put rubber feet on the bottom so the base won't spin while turning the top