1 / 2
Lithophone Frame 160mm x 160mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED Lithophone Frame to be used with generic off the shelf LED Strips
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
This frame was made to allow for the use of standard LED strips with minor soldering.
Recommended Installation:
- Using and buying 300LED per M LED strips. This model will use about 60cm
- Buy a step up DC-DC boost converter.
- Buy the USB type C female connector.
- Cut the LED strip to fit within the frame, solder the 12V pins from the led strip to the output of the boost converter.
- Solder the USB female connector to the input end of the boost converter.
- Tune the voltage of the boost converter to be just bright enough that your image is illuminated. Typically 10v is enough.
PLEASE NOTE: If the LEDs are fully driven the PLA material can and likely will warp.
https://lithophanemaker.com/Color%20Lithophane.html
- 5M 5630 SMD 300Led Strip Light 4500K Cool Warm White Flexible Non Waterproof 12V
- 1PCS MT3608 DC-DC booster module 2A
-10X USB 2.0 Type C Connector 14 Pin Female Socket receptacle Through Holes PCB