LayersFactory
Report model
1 / 1
Tenacious 6 Mk2 (Legacy Design) — image 1

Tenacious 6 Mk2 (Legacy Design)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Audio
License
Creative Commons — Attribution — Noncommercial
DetailsMakes & commentsRemixesCollectionsRelated

This is now a legacy design and it is strongly advised you look at the Elemental or Fidelity series

The Firefly & Flare motors are supported on Elemental Series

 

Thanks for looking at Tenacious 6 Mk2, using the entry motors Firefly or Flare.

This design is a evolution of the older Sparkler motor based designs, but with improvements across the board. These new motors will be used till at least the end of 2023. Improvements over previous designs include:

  1. TPU parts should print better with better bonding of the pleats in the Surround and Spider
  2. No magnets held by printed parts! so no more chassis prints breaking during assembly
  3. FEA designed Surround & Spider to improve distortion
  4. Screw in motor design, allowing quick and easy swap out to future designs

Further improvements can be made by using the foaming TPU called Varioshore from Colorfabb. This will gain 2.8dB.

The design however was originally designed around standard 95A TPU & PETG.

 

PETG:

Cone (Vase Mode)

Chassis

Front Fascia

Outer Wall

Phase Plug

Back Cap

 

TPU 95A / Varioshore:

Surround

Spider

A guide will be following shortly to help with assembly. The 2 speaker cabinets Brazen and Mini Cube are also provided. The Mini Cube fits onto a Prusa Mini!