1 / 1
dýně / pumpkin HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
dýně / pumpkin HueForge
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
The Model is 150x78.5mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Grey Transmission Distance: 20
PLA Red Transmission Distance: 4.5
PLA Basic Yellow Transmission Distance: 6
PLA White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.84mm) swap to Grey
At layer #7 (0.96mm) swap to Red
At layer #13 (1.68mm) swap to Yellow
At layer #16 (2.04mm) swap to White for the rest.