Qidi Plus4 Broken Heater Chamber Mount Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Qidi Plus4 Broken Heater Chamber Mount Fix - Nut & Bolt substitute
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Qidi Plus4 Broken Heater Chamber Mount Fix - Nut & Bolt substitute.
I made this part instead of using the recommended nut-and-bolt solution proposed by Qidi support when my heater chamber fan snapped off.
Made this fix to integrate a standoff the height of the stock mounting point / standoff that snapped off.
Parts required:
1 - M3 x 4mm x 5mm Heat Set Insert
1 - M3x16 BHCS
Recommend printing in ASA or ABS. PETG might work. You will, unfortunately, need to drill through the side panel. An alternative to this is to completely replace the side panel or use a nut and bolt like what was proposed by support.