Christmas Santa Sleigh / sled
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cute Santa sleigh, both decorative & functional.
- Rating
- 5 / 5
- Likes
- 145
- Downloads
- 412
- Makes
- 3
- Views
- 2,132
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
I test printed this on an Ender 5 pro and Elegoo Neptune 3 pro. Both did great without the use of supports. Make sure your printer and sliced file are set up in a way so it can handle overhangs up to 70 degrees. I specifically designed it that way because I simply hate supports and complicated prints. It’s easier, faster, and doesn’t waste your valuable filament. All files are in the right orientation to print.
You could glue on the side pieces for extra sturdiness, but the bag version also fits nicely without.
The smallest print i ran was 30%, and is great for use in a Christmas village display. If printed on 100%, the finished piece is approx. 20x12x12 cm in size.
0.4 nozzle
0.3 Layer height
10 - 15% infill
1.2 wall width
no supports
PLA - Polymaker polyterra white
Commercial License
Want to sell physical prints of this model? A commercial license is available through the PixelWhiz3D Club. Thank you for supporting future designs!