Bicycle wheel centering indicator stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.68 – €4.49 net (excluding VAT)
For file: CK_v7_All_0.2mm_PLA_MK3S_4h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.08 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 4.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The indicator stand consists of three main parts and a reduction for smaller diameters. It is advisable to stick a…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The indicator stand consists of three main parts and a reduction for smaller diameters. It is advisable to stick a rubber mat on the surfaces that are attached to the bicycle so that they do not move when tightened with the elastic tape. The thickness of the layer is set to 0.2 mm, infill 20%. PLA, PETG filament is suitable for the model...
Category: Sport & Outdoors