1 / 1
ERCF V2 Holder for Voron
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot for mounting ERCF V2 on the top of the voron printer using two pieces of 2020 extrusion.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 52
- Makes
- 0
- Views
- 535
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
MENTION:
The top PC panel and tape on your printer should be 4mm thick in total or you will have to tweak the model.
There's a gap between the top panel and the extrusion, and you can mount your ERCF board using the model: ERCF V2 MMB Mount by Bernie Nazari | Download free STL model | Printables.com
BOM:
- Printed Parts x4
- M5x10 or longer BHCS x4
- M5x12/14 BHCS x4
- M5 T-nut x4
- Extrusion (the same length as the one on your voron printer in x direction) x2