Ikea OMAR Clamp for Rails (FreeCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps things on the OMAR shelf. Parametric FreeCAD file.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 39
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
update 19 Jan 2025:
Cannot 100% recommend this model at this time.
Encountering layer splitting at threads after repeating screwing/unscrewing (somewhat expected). Longevity may be improved with modification of tolerances. Or use of nuts.
To be updated at some point …
Made with FreeCAD 1.0.0RC2. File is parametric for most combinations of variables (see screenshot). Suppress the dowel pockets for your desired configuration.
There are corner pieces (two dowel holes) and end pieces (single dowel hole).
Pictured model uses 3/8" wood dowel and 5M x 10mm socket cap screws and 2 corner + 2 end
Printed mine in PLA 0.2mm standard settings