1 / 1
Guide PC210 macro adapter - lens holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use a 12 mm ZnSe CO2 laser lens as a macro lens on the Guide PC210 thermal imaging camera.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is to allow using a Guide PC210 thermal camera for electronics repair. It mounts a cheap 12 mm ZnSe lens (China PVD quality is what I used, these are cheaper) to the PC210.
I have printed in PETG and used Hilbert Curve and 1 perimeter on top for looks.
The lens hole came out a bit tight - I'm not sure is that was the lens or printer tolerances. I did widen the hole a bit to allow a press fir for the lens.
Be careful when fitting the lens - the lens material is toxic.
Created in FreeCad 1.0 RC2.