RJ45 Wall Plate Outlet Spacer Bezel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spacer is designed to fit behind a standard RJ45 wall plate (single or double) and provide 5mm spacing to sit flush
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 70
- Makes
- 0
- Views
- 529
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
I designed this spacer to fit behind an RJ45 wall plate and provide 5mm spacing so the wall plate can sit flat when installed. I installed my wall plates by drilling a hold in the ceiling and running the ethernet cable through. In order for wall plates to sit flat in this configuration, a much larger hole must be drilled. To avoid this, I designed this spacer to offset the wall plate so it can be installed flat without drilling a larger hole.
There are two versions, one with a cut that allows the spacer to be installed without unplugging the RJ45 cables from the wall plate. The other with no cut requires the ethernet cable to be passed through the spacer. I recommend the no cut version for a new install. I used the cut version since I didn't want to unplug the ethernet cables and the side with the cut is not visible with how I have it installed.
Please post your makes and remixes. I'm no CAD pro, but this model worked for my needs