Top Hat, Monocle, and Moustache Flexi-Rex (optional keychain hole)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.65 – €0.79 net (excluding VAT)
For file: Flexi-Rex-tophat single_0.4n_0.2mm_PLA_MK4IS_43m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Flexi-Rex, but with a top hat, monocle, and moustache.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 62
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Have you ever wanted your flexi-rex to have a monocle, top-hat, and moustache? Well, now it can! The monocle is situated on the right side of Rex, with a moustache on the front, and a top hat on their head. I made this model partially for Movember (hence the moustache), but mostly for fun to print at my university.
Note that the included G-code and .3mf file has the original flexi-rex at 77% of original size, not 100%. I have not tested the file at any other size yet.
To create this model I utilized PrusaSlicer's negative and positive object slicing features. This means you can also delete the torus in PrusaSlicer if you don't want the keychain ring hole. The hat, monocle, and moustache were modelled in Fusion360. No supports should be needed!
There are two models, one for MMU (multi-material) and one for solid colors. The MMU model differs by a smaller moustache, as otherwise it would clip outside the walls of the Flexi-Rex.