1 / 2
Sovol SV08, cover switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covering the contacts of the switch for the Sovol SV08
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 124
- Makes
- 2
- Views
- 686
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After removing the original cover, the contacts on the switch are open at 230 V. If you lift the printer at the bottom, you can easily touch them. This is prevented by the cover. M3 hammer nuts for 20x20 profiles and M3x10 screws are also required.
I used PLA+, but other materials are certainly also possible.