Rugged Heater Bloc Base

NEW VERSION AVAILABLE HERE: 

MUTUAL AID IS HOT

Material: Regular PLA is okay. Avoid especially brittle filaments. ASA, ABS or PETG are preferable. 

Nozzle Diameter: 0.8 mm

Layer Height: 0.3 mm

Infill: Turn off

Top and Bottom Shells: Turn off

Perimeters: Set to 6, or enough for the model to print as a single connected piece. Small holes where perimeters don’t meet are okay.

Seam Placement: If printing text on the model, ensure seams are positioned away from the text for a cleaner finish

I haven't had any adhesion issues using a textured build plate, no adhesive. 

Informed Consent & Disclaimer

Use at your own risk. This STL file is provided for personal, educational, or experimental use only. The designer makes no claims of safety or suitability for any particular purpose.

Users are responsible for:

• Following all safety instructions and warnings associated with the device.

• Ensuring proper ventilation, fire safety, and supervision while using the device.

• Keeping children, pets, and flammable materials away from the device.

Possible risks include (but are not limited to):

• Fire or burns from flames or hot surfaces.

• Carbon monoxide exposure, especially in low-oxygen or poorly ventilated spaces.

• Fuel-related hazards; use only unscented 99% isopropyl alcohol. Scented or other alcohols may produce toxic fumes or flare unpredictably.

• 3D-printed bases may warp, crack, or become flimsy, especially under heat, and can themselves become fire hazards.

• Structural failure of the assembly, including enclosures or pots falling.

• Damage to tents, fabrics, or other nearby materials.

• Misuse of fuel or lighting technique, resulting in fire, injury, or property damage.

The designer assumes no liability for any injury, property damage, or other harm resulting from use, misuse, or modification of this design.

By downloading, printing, or using this STL file, you acknowledge that you understand and accept these risks.