Sling Tsi - Side Air Duct Splitters - Version 1 (Note there is an updated version 2 available)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design splits the air intake 50/50 between the front and rear seats.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a design for the side air ducts on a Sling Tsi aircraft to split the airflow entering the plane. The intake has a diameter of 74mm, the front outlet has a 50mm diameter and the rear passenger side panel outlet is 88mm x 24mm.
The design has an internal splitter which sends 50% of the airflow to the back seat passengers via the side channel and 50% of the air to the front seat vents.
It has been designed to be printed with a wall thickness of 1.6mm from PETG for long term durability.
There is an internal splitter which sends 50% of the airflow to the back seat passengers via the side channel and 50% of the air to the front seat vents.
A 0.8mm nozzle was used with a 0.32mm layer height. Wall thickness is 1.6mm. A 50mm brim was also used to provide a strong connection to the plate as the finished item is 280mm in length.