1 / 1
MacChargerCableSupport
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I had to re-solder the wiring of the cable at the mac charger. To pretoect it in the future I made this TPU-sleeve. File can be printed twice and fixed with M2.5 or M3 screws.
Printed with 95A TPU with 0.2 mm or 0.3 mm layer height.