BTT Kraken driver fan (modified with cable anchor and 10mm offset)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified BTT Kraken Driver Fan with offset fan and cable anchor
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 200
- Makes
- 0
- Views
- 740
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Lansi1d's excellent fan bracket designed for the BTT KRAKEN 3D printer's mainboard
This version offset's the 5015 by 10mm to give more access to some of the Kraken's connectors. It also includes a cable anchor that you can use to route the stepper motor wires using a zip tie.
There are 2 versions. One with a retaining arm that you can use with a longer M3x45 mm or M3x50 mm screw to anchor the part to the kraken mount since the offset 5015 may pull a little more.
I rebuilt Lansi1d's original to make this modification and so I've included a step file with that as well as my own models here and this remix is licensed under the same license as the original