Ikea Bissa raiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add 7cm to the cabinet's height. Ask me for the source for a custom height.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My use case: the wall switches were at the exact wrong position. Now, they are hidden behind the cabinet (and not used, thanks to domotics).
The largest parts are 256 mm deep, therefore can be printed with a Bambu Lab A1/P1S/X1C. Don't forget to check the purge line and disable it if needed!
This model add 7 cm. You can edit the size yourself and cut the top, or ask me for the Tinkercad source, or ask me a custom height.
Advice before printing the whole model: print a front corner to check if it fit nicely to your cabinet, and bits of connectors to see if they fit without issue. I printed this model in PETG, the connectors are tight and needed a careful but firm push.
Again, don't forget to check the purge line and disable it if needed.