Customisable Remote holder OpenSCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customisable remote holder built in Openscad
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 108
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is a customisable remote holder that allows for a few different way to be attached to a wall.
The holder section can be customised to suit the remote size you have, including width, depth, height and corner radius.
The backer currently has two main options.
ScrewPlate: Creates a solid back with screw holes for attachment.
Clipsal2000: Generates a Clipsal 2000 compatible surround with the holder attached to the front. A use case for this is DC fans where you want to prevent access to the mains switch and use the remote in its place.
Documentation: https://docs.ostat.com/docs/openscad
Repo: https://github.com/ostat/OpenSCAD-Projects
OpenSCAD Customiser settings
Main
| Setting | Description |
|---|---|
holder | Type of holder to create [none: backer only, remote: remote holder] |
backer | Type of backer to use [clipsal2000: clipsal 2000, screw: screw plate] |
Remote Holder
| Setting | Description |
|---|---|
remoteholder_remote_size | Size of the remote (width, depth) |
remoteholder_remote_radius | Radius of the remote side corners |
remoteholder_height | Height of the remote holder (should be 1/4 the height of the remote) |
remoteholder_wall_thickness | Wall thickness of the remote holder |
remoteholder_easyPrintStanding | Easy print standing option |
remoteholder_front_relief_enabled | Open the front of the remote holder |
remoteholder_front_relief_width | Width of the front relief |
remoteholder_front_relief_fillet | Fillet radius of the front relief |
remoteholder_front_relief_height | Height of the front relief |
remoteholder_back_relief_enabled | Enable back relief |
remoteholder_back_relief_width | Width of the back relief |
remoteholder_back_relief_fillet | Fillet radius of the back relief |
remoteholder_back_relief_height | Height of the back relief |
remoteholder_back_chamfer | Chamfer size of the back |
Backer Clipsal 2000
| Setting | Description |
|---|---|
clipsal2000_top_thickness | Top thickness of the Clipsal 2000 backer |
clipsal2000_wall_thickness | Wall thickness of the Clipsal 2000 backer |
clipsal2000_easy_print_facedown | Easy print facedown option for Clipsal 2000 backer |
clipsal2000_easy_print_standing | Easy print standing option for Clipsal 2000 backer |
clipsal2000_Internal_size | Internal size of the Clipsal 2000 (width, height, depth) |
Backer ScrewPlate
| Setting | Description |
|---|---|
screwplate_slot_diameter | Diameter of the screw plate slot |
screwplate_slot_length | Length of the screw plate slot |
screwplate_slot_upper_position | Upper position of the screw plate slot |
screwplate_slot_lower_position | Lower position of the screw plate slot |