1 / 4
Vertical X for Mendelmax 1.5 inspired by the Prusa MK4 — image 1
1 / 4

Vertical X for Mendelmax 1.5 inspired by the Prusa MK4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vertical X axis for the Mendelmax 1.5 inspired by the Prusa MK4's vertical x-axis parts.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
96
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Yes, I designed a small upgrade for a 12 year old printer. I wanted a vertical x-axis similar to the Prusa MK4, however the hardware I have on hand is from my old Mendelmax, specifically;

16mm brass bushings for the vertical guide rods
38mm delrin leadscrew nut
8mm x-axis smooth rods

Besides the above, the main differences are additional clamps for the rods and bushings. I also added a tensioner for the belt using a M5 bolt and nut.

I designed the tensioner for a 22mm bearing, which is what I have on hand, which unfortunately means that the belt path isn't perfectly straight to the pulley. However I can accept a ~0.1mm deviation over 250mm. The clearances are pretty tight, but everything should be able to pass through each other without crashing.

Some supports are needed, which I just designed in, should be easy to break off using needlenose pliers.

I don't have a working printer at the moment, so I'll have to pay to get this printed before I can test it. If you find any mistakes, please let me know!

Tags