1 / 3
Shimano Pressfit Bottom Bracket Gentle Removal Tool SM-BB71-41B (No hammer) — image 1
1 / 3

Shimano Pressfit Bottom Bracket Gentle Removal Tool SM-BB71-41B (No hammer)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tool for removing Shimano bottom brackets, made with printed parts and hardware components. It doesn’t require hammer.

Rating
0 / 5
Likes
6
Downloads
51
Makes
0
Views
636
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

I designed this tool based on the measurements of a Shimano Pressfit SM-BB71-41B. It might also work for other models, but I recommend checking the dimensions and making adjustments if needed.

You will need few hardware parts:

  • 1x This type of rawlplug (very common here in Italy; they are used to fix shelves). The one I used was M8 threaded and 165 mm in total length. (You will discard the plastic part);
  • 1x M8 Nut;
  • 1x M8 Washer;

 

Rawplughousing.stl - As you can see in the pictures you need to push the rawplug into the housing (make sure it goes all the way deep).

Cup.stl - You'll need to add a PAUSE when printing the Cup.stl to allow for embedding the washer in its seat. Insert the nut into its seat once the cup is printed.

Pusher.stl - The flat part is the one that makes contact inside the press-fit and applies pressure when screwing.

Tags