1 / 1
Phoenix by John Byrne Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Asparagus people beware!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jean Grey - The Phoenix! As only John Byrne could draw her. This was a fun one for my first color Hueforge.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Red
At layer #14 (1.20mm) swap to Orange
At layer #21 (1.76mm) swap to Yellow for the rest